...
The procedure is shown in the following example process.-
...
The goal is a rejection after phase 3 before phase 2 as shown below.
...
-To achieve this, a gateway gate way is first created at the point where the return jump should land, i.e. between phase 1 and phase 2.
-
...
Now the gateway end must be placed behind phase 3. Since this is not possible directly, in the reverse case phase 2 and phase 3 must be placed before the end (and thus in the only gate). Since this is not possible in the process graphic, this must be done in the object overview. -
...
It is recommended to move the objects in sequential order, i.e. first phase 2 and then phase 3. After moving phase 2 into the gate, the following state presents itself.
...