...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
The general activation of product integration is assigned to the transport system and needs to be transported.
...
Activation Product Integration on System
...
Field | Description |
|---|---|
Tool-ID | Product ID, as listed in the central Customizing environment. |
Activation | Defines whether the product is activated in general and if so, how the selection "Single integration point" is handled:
|
See also Selection of Individual
User. Spec. | Definition whether the product shall be activated for all users or if not, how the user groups shall be handled. This setting is used in combination with assigned user groups according User Specific Activation of Products.
|
|
...
|
Selection of Individual Integration Points
...
If a product is activated as described under https://pronovia.atlassian.net/wiki/spaces/CUSTEN/pages/613679199/General+Activation+Product+Integration#Activation-Product-Integration-on-System, this setting allows to activate or deactivate single integration points, depending on the options used.
Field | Description |
|---|---|
Integr.Point | Integration point which shall be activated or deactivated for the selected product. This can be a BusinessAddIn (BADI) or a function exit (CUST EXIT). |
...
...
Special
...
Call
...
Sequence
...
and
...
Parameter
...
This setting allows to change the order of the calls to the products and also to call a product multiple times in an integration point. This option is meant for internal use only and should be only used in consultation with ProNovia.
Field | Description |
|---|---|
Integr.point | Integration point for which a special call sequence shall be defined. |
Sq. (Sequence) | Sequence of call. See |
Tool-ID | Product ID, for which this sequence shall be defined. |
Parameter | Additional parameter for this call. See |
...
Special Call Sequence and Parameter
Within different integration points several ProNovia products will be called. The default call sequence is as follows:
Integration point | Default call sequence |
|---|---|
BADI BOM_EXIT.START_SCREEN_CHECK |
|
BADI DOCUMENT_STATUS01.AFTER_CHANGE_STATUS |
|
BADI DOCUMENT_MAIN01.AFTER_READ_DATA |
|
BADI DOCUMENT_MAIN01.BEFORE_SAVE |
|
BADI DOCUMENT_NUMBER01.DOCVERSION_GET_NEXT |
|
CUST EXIT MGA00001 / EXIT_SAPLMGMU_001 / ZXMG0U02 |
|
The OLM double calls are necessary. Only this way dependencies from PRM to OLM and vice versa can be handled correctly.
Certain situations require other sequences. This customizing setting allows to override the default settings.
...
Without entry in field Sq (sequence) the default call sequence is use. Manually registered sequences will always be run BEFORE any default call sequence. The screen shot above leads to the following call sequence:
PRM (manually defined sequence 10)
OLM (manually defined sequence 20)
PRM (manually defined sequence 30)
MMS (default sequence 4)|
...
...
Selection
...
of
...
Individual Integration Points
...
If a product is activated under https://pronovia.atlassian.net/wiki/spaces/CUSTEN/pages/613679199/General+Activation Product Implementation on +Product+Integration#Activation-Product-Integration-on-System, this setting can be used to activate or deactivate individual integration points, depending on the option used.
Field | Description |
|---|---|
Integration Point | The integration points to be activated or deactivated for the selected product. This is either a BusinessAddIn (BADI) or a function exit (CUST EXIT). |