General Activation Product Integration

The general activation of product integration is assigned to the transport system and needs to be transported.

Activation Product Integration on System

Field	Description

Field

Description

Tool-ID

Product ID, as listed in the central Customizing environment.

Activation

Defines whether the product is activated in general and if so, how the selection "Single integration point" is handled:

Product NOT active
All integration points active, except entered points
Only entered integration points active. See also General Activation Product Integration | Selection of Individual Integration Points.

User. Spec.

Definition whether the product shall be activated for all users or if not, how the user groups shall be handled. This setting is used in combination with assigned user groups according User Specific Activation of Products.

All users
- Setting in User Specific Activation of Products will be ignored, product will be active for all user.
Only registered users use tool
- Activation only valid for user, which are assigned to a use User Specific Activation of Products.
Tool will not be used by registered users
- Activation is valid for all users, except users which are assigned to a user group listed under User Specific Activation of Products.

Even if a product is deactivated for a user, certain integration points remain active. These are those which are necessary for checks / securing data consistency.

Selection of Individual Integration Points

If a product is activated as described under General Activation Product Integration | Activation Product Integration on System, this setting allows to activate or deactivate single integration points, depending on the options used.

Field	Description

Field	Description
Integr.Point	Integration point which shall be activated or deactivated for the selected product. This can be a BusinessAddIn (BADI) or a function exit (CUST EXIT).

Special Call Sequence and Parameter

This setting allows to change the order of the calls to the products and also to call a product multiple times in an integration point. This option is meant for internal use only and should be only used in consultation with ProNovia.

Field	Description

Field	Description
Integr.point	Integration point for which a special call sequence shall be defined.
Sq. (Sequence)	Sequence of call. See General Activation Product Integration \| Special Call Sequence and Parameter.1.
Tool-ID	Product ID, for which this sequence shall be defined.
Parameter	Additional parameter for this call. See General Activation Product Integration \| Special Call Sequence and Parameter.1.

Special Call Sequence and Parameter

Within different integration points several ProNovia products will be called. The default call sequence is as follows:

Integration point	Default call sequence

Integration point	Default call sequence
BADI BOM_EXIT.START_SCREEN_CHECK	PRM MSC
BADI DOCUMENT_STATUS01.AFTER_CHANGE_STATUS	PRM SDF
BADI DOCUMENT_MAIN01.AFTER_READ_DATA	PRM SDF
BADI DOCUMENT_MAIN01.BEFORE_SAVE	UTI OLM PRM OLM SDF
BADI DOCUMENT_NUMBER01.DOCVERSION_GET_NEXT	PRM SDF
CUST EXIT MGA00001 / EXIT_SAPLMGMU_001 / ZXMG0U02	OLM PRM OLM MMS

The OLM double calls are necessary. Only this way dependencies from PRM to OLM and vice versa can be handled correctly.

Certain situations require other sequences. This customizing setting allows to override the default settings.

Without entry in field Sq (sequence) the default call sequence is use. Manually registered sequences will always be run BEFORE any default call sequence. The screen shot above leads to the following call sequence:

PRM (manually defined sequence 10)
OLM (manually defined sequence 20)
PRM (manually defined sequence 30)
MMS (default sequence 4)|

Selection of Individual Integration Points

If a product is activated under General Activation Product Integration | Activation Product Integration on System, this setting can be used to activate or deactivate individual integration points, depending on the option used.

Field	Description

Field	Description
Integration Point	The integration points to be activated or deactivated for the selected product. This is either a BusinessAddIn (BADI) or a function exit (CUST EXIT).